Agricultural & industrial equipment.

Polyester outdoors and epoxy or hybrid indoors, so brand colours stay stable and durable.

Main: PolyesterOption: Epoxy, Hybrid

Who this is for

Farm machinery and implements, industrial equipment covers and guards, fitness equipment, valves and pipe.

Machinery faces appearance demands, mechanical wear, sunlight and contact with media at the same time. Outdoor parts such as farm machinery, valves and pipe suit polyester; indoor industrial and fitness equipment can use epoxy for hardness and wear or hybrid for appearance. Heavy-duty anti-corrosion and immersion parts need dedicated systems and are outside this general recommendation.

Buyer problems

What usually goes wrong.

01
Matching brand colours such as machinery red, green or yellow, batch after batch.
02
Fading and gloss loss in sun, and contact with fertilisers and agrochemicals.
03
Coverage and cure on welds, thick sections and complex frames.
04
Impact, scratching and wear during handling, assembly and use.
05
One powder for the whole machine leaves some parts over- or under-protected.

Agricultural & industrial equipment parts on a powder coating line — **On the line.** Heavy welded frames in brand colour on a heavy-duty conveyor.

Recommended systems

By part and environment.

Based on our product catalogue. Suitability is confirmed on your part, film thickness, cure and specification.

Need / use	Recommended	Basis	How we start
Outdoor machine bodywork and covers	Polyester	Weathering, edge coverage; outdoor; farm machinery listed in our catalogue	Sampled against brand colour and outdoor requirements
Indoor industrial and fitness equipment	Epoxy	High hardness, wear, acid and alkali resistance; indoor	Confirmed against mechanical and media requirements
Indoor equipment housings with high appearance needs	Hybrid	Good flow, high gloss; indoor	Appearance and mechanical properties confirmed
Valves and pipe	Polyester	Pipe and valves listed in our catalogue	Evaluated against environment and your standard

What we bring

Capabilities you can use.

01
In-house hardness, impact, bend, adhesion and salt spray conditions.
02
Brand-colour matching with approved panel versions.
03
ISO 9001 quality management.

What is verified

Before bulk supply.

From need to bulk: needs → selection and colour → sample evaluation on your line → order confirmation → ongoing supply to the approved version.

Check	Focus
Appearance and coverage	Welds, edges and complex structures
Mechanical	Adhesion, impact, bend and hardness
Environment and media	Salt spray, outdoor exposure and real media
Cure	Actual temperature and time on thick parts

Scope. Heavy-duty anti-corrosion, long-term immersion and high-temperature parts need dedicated systems and are not covered here.

Agricultural & industrial equipment coating close-up — **Weld and bolt hole.** Coverage on weld beads and edges, where protection starts.

How to start

“We separate outdoor and indoor parts first: polyester outdoors, epoxy or hybrid indoors. Send your colour code or a physical sample and we evaluate on a representative part.”

Start a project

Send us your most-used colour and your hardest one.

Tell us the part, environment, process and expected volume. We reply with a proposed system and a sample plan. Orders from 1,000 kg.

Request a sample Send project details