Appliances & commercial refrigeration.

Hybrid indoors and polyester outdoors, so white and custom-colour housings run steadily in production.

Main: HybridOption: Polyester

Who this is for

Refrigerators, washing machines, microwaves, water heaters, commercial freezers and display cabinets, AC housings.

Appliances are the first application our catalogue lists for hybrid powder. Manufacturers need stable whites and custom colours, good flow and a cure window that fits the line speed; commercial refrigeration also meets condensation and cleaning agents. We use hybrid for indoor appliance housings and polyester for outdoor parts such as AC housings, and start with sheet-metal parts, second-source supply or new colours.

Buyer problems

What usually goes wrong.

01
Colour difference, over-bake yellowing and gloss consistency on whites and custom colours.
02
Flow, orange peel, edge coverage and rework rate in production.
03
Condensation, humidity and cleaning agents on commercial refrigeration.
04
Matching the cure window to the line speed.
05
Switching suppliers means re-approving panels, which takes time.

Appliances & commercial refrigeration parts on a powder coating line — **In production.** White cabinet bodies run in volume, so colour and gloss must stay steady.

Recommended systems

By part and environment.

Based on our product catalogue. Suitability is confirmed on your part, film thickness, cure and specification.

Need / use	Recommended	Basis	How we start
Refrigerator, washer, microwave and water heater housings	Hybrid	Good flow, high gloss, resists yellowing; indoor; appliances listed in our catalogue	White and custom colours confirmed on panels; watch over-bake yellowing
Commercial freezer and display cabinet housings	Hybrid	Good flow, high gloss; indoor use	Humidity, condensation and cleaning agents evaluated by your method
AC housings and outdoor brackets	Polyester	Weathering and edge coverage; outdoor; AC housings listed in our catalogue	Line trial against weathering and humidity requirements
Fast lines that need a lower oven temperature	Hybrid, low-cure grade	Low-cure grades available	Confirmed against your actual oven profile and line speed

What we bring

Capabilities you can use.

01
Colour, gloss and film thickness measurement for whites and custom colours.
02
Approved panel versions for consistent repeat production.
03
In-house salt spray, adhesion, impact and bend conditions.
04
ISO 9001 and ISO 14001 for supplier approval files.

What is verified

Before bulk supply.

From need to bulk: needs → selection and colour → sample evaluation on your line → order confirmation → ongoing supply to the approved version.

Check	Focus
Colour and surface	Colour difference, gloss, flow and yellowing
Process	Cure window, film thickness and reclaim behaviour
Adhesion and forming	Coating after bending and impact
Environment	Condensation, humidity and cleaning agents, by your method

Scope. Direct food-contact or high-temperature internal parts need dedicated products and documents and are confirmed separately.

Appliances & commercial refrigeration coating close-up — **Folded edge.** Flow, gloss and edge coverage on white panels, with condensation in mind.

How to start

“Start with one housing or one white or custom colour. We match panels first, then trial at your line speed.”

Start a project

Send us your most-used colour and your hardest one.

Tell us the part, environment, process and expected volume. We reply with a proposed system and a sample plan. Orders from 1,000 kg.

Request a sample Send project details