POLYMERPowder coatingsAutomotive parts & wheels.
Confirm the specification and coating system first, then evaluate parts and wheels under clear technical conditions.
Who this is for
Automotive accessories, wheels, bicycles.
Our catalogue lists automotive accessories and bicycles as polyester applications, so we keep automotive parts and wheels as selective projects. Wheels and automotive parts usually have a complete coating system, defined specifications and a supplier approval process, so suitability cannot be judged from a colour panel alone. We confirm the specification first, evaluate the product second, and arrange samples last.
Buyer problems
What usually goes wrong.
- 01Wheel coatings usually combine primer, colour and clear layers that must work together.
- 02Customers have defined specifications, tests and approval processes.
- 03Colour and metallic effects must be consistent, because batches show on the finished vehicle.
- 04Corrosion, stone-chip and chemical resistance requirements differ by customer.
Recommended systems
By part and environment.
Based on our product catalogue. Suitability is confirmed on your part, film thickness, cure and specification.
| Need / use | Recommended | Basis | How we start |
|---|---|---|---|
| Wheel colour coats, automotive accessories, bicycles | Polyester with metallic effect | Weathering, edge coverage; outdoor; automotive accessories and bicycles listed in our catalogue | Layer and adjacent materials confirmed before sampling |
| Wheel clear coats | Transparent or translucent powder | Transparent and translucent grades available | Compatibility evaluated against your system and specification |
What we bring
Capabilities you can use.
- 01Colour matching and metallic effects for wheel colours.
- 02In-house adhesion, impact and salt spray conditions.
- 03ISO 9001 quality management.
What is verified
Before bulk supply.
From need to bulk: needs → selection and colour → sample evaluation on your line → order confirmation → ongoing supply to the approved version.
| Check | Focus |
|---|---|
| Coating structure | Substrate, pretreatment, layer and adjacent materials |
| Specification | The tests and approvals your customer requires |
| Appearance | Colour, metallic effect and gloss consistency |
| Part validation | Evaluation on the real process and complete system |
How to start
“Tell us the layer the powder sits in, your current system and your customer specification. We confirm the product direction before arranging samples.”
Start a project
Send us your most-used colour and your hardest one.
Tell us the part, environment, process and expected volume. We reply with a proposed system and a sample plan. Orders from 1,000 kg.